80ft IR Illuminator | AI4 No Hot Spot Wide Angle Infrared Light for Security Camera (w/Power Adapter)

This device is perfect for what I needed it to do, Basically I had two POE cameras that for some reason after a few months, the night vision stopped working on them and to RMA them it would have costed me more than the camera's were worth so the solution was to give this a shot and it worked well, and in my situation the camera's that failed also had two screw holes on the top of the camera so I was able to mount this on top of the camera so it would shine a direct path, at first I didn't think it would work well but once it got dark out, I found that it works better than the actual camera's IR lights ever did. The only thing I don't like is the power cable, I wish this company would make these POE instead of using a power cord as it would have made the installation better but I can't complain, this IR lights up everything so I can see and detect everything, my camera's motion detect works great with this and all considering I am very happy with this purchase.

“In light” of recent talk surrounding concerns about night vision abilities of the new Arlo Pro 2 camera, I thought I’d explore and review a few third-party auxiliary IR lights to supplement the existing illumination already on the camera. After being a pleased Arlo user for a few years, I too found the Arlo 2’s slightly short on night lighting when compared to their predecessors. Before going further, let me make clear that despite of this minor shortcoming, I still prefer the newer Arlo Pro 2’s over the older models given the added features/capabilities that the new Arlo Pro 2 has. And now that I have found a more than adequate solution to fill the void of night lighting, I couldn’t be happier. And by the way, these solutions apply to any of the Arlo cameras for those wanting to augment their night recordings. So, here’s what I found. What they do: For those unfamiliar with night vision/Infra Red, we are talking about light invisible to the human eye, so not just any light will do. Night vision/IR lights with wavelengths other than 850nm will do little if anything to help the camera at night. It is also notable that these lights are practically invisible to humans/animals. At night, just as you do when the Arlo camera is active, you will see a faint red glow of the LED bulbs, though hardly noticeable a few feet away. Only when looking through the Arlo camera can you see the huge difference of illumination. The hardware: I bought three IR lights from Amazon that match the Arlo’s 850nm wavelength. I was also careful to look for the widest-angle lights – those with a 90 degree – to capture the most area possible, and the longest distance/most powerful yet keeping the size of the light down to a minimum since ideally these things are going to be mounted right next to the cameras. There were lots to choose from but I narrowed it down to three that represented a small, medium, and large size. I wanted to see how small I could go before losing an effective range of the light. Here’s what I came up with: Small: Tendelux 80ft IR Illuminator AI4 ($19.65) Medium: Tendelux 120ft IR Illuminator BI8 ($30.65) Large: JC (JCHENG) 131ft IR Illuminator 12-LED ($31.99) Each of the lights have an outdoor rating of IP65 or higher which means they are fine in the rain and even under the pressure of washing. They all draw 1-watt per bulb so the energy pull of each of the three sizes are 4watts, 8watts, and 12-watts. Each one also includes a built-in photocell switch that automatically turns them off during the day. They all come with standard power adapters (which need to be protected from the elements) that are very short, but I prefer it this way since you can Amazon a “CCTV 2.1mm 5.5mm” extension for the length you need. Something else notable is that the small and medium sized lights (made by Tendelux) have much smaller power adapters than the larger JC unit, likely making them small enough to allow a second plug to fit into a typical outdoor outlet (for those also using power to the camera itself). The test: Using an Arlo Pro 2, I tested each light independently alongside of the camera and below are my results. Conclusion: As you can see, there wasn’t much difference across any of the three. Only when I stepped up to the 12-LED unit did I see slightly more flood that could convince me to use something of that size. I understand that the results will vary depending on factors such as objects within the range of view, but I am satisfied to see that the small unit (AI4) is sufficient for my needs, not just because of its lower price, but more importantly its small size is aesthetically appealing. After all, I already have enough discomfort having cameras around my properties and the thought of added IR lights is about as much as I can handle. Granted, I haven’t had these long enough to witness their longevity and durability but they each seem solid and very well built. Personally, I like the Tendelux brand as the dark lens conceals the LED bulbs, making them more look like a solar charger than a light. So for me, I’m going with the Tendelux 80ft IR Illuminator AI4!

Ran it 24/7 for 3 years. Quit working 3 years to the day after I put it into service. Guess I can't complain. It did a very good job of IR illuminating my garage so my security cam could see with the doors shut. Plenty bright enough for a standard 2 car garage. In case anybody's interested, the failure mode was that one LED went open circuit and since they are all 4 in series the whole unit went dark. I'm going to replace all for LEDs now that I've got it opened up and see if I get another 3 years from it.

My wife wanted a baby monitor that did not connect to the internet for safety reasons, so we found one we have really loved (except for the night vision, which was terrible.) This IR light was a game changer! Firstly, I was worried that the red glow it produces would be too bright. Nope. You can barely see the red glow in pitch darkness. However, the IR light it creates is blinding! Like a spot light. I actually positioned the light upward to bounce off the ceiling. This allows the camera on the baby monitor to function clearly. One thing to note- the high amount of IR triggers our Ring Camera to switch into night mode, even when lights are on. Other notes: Easy to connect and set up. No lag/delay. No connectivity issues. Features are simple and work well.

Worked great for 3 weeks, then just stopped. Followed all support troubleshooting suggestions, unplug/reboot, check fuse. Just dead. Nice product, wish it would last a year or two before completely dying. EDIT: Was sent a replacement and this one is functioning well. Changed my 1-star rating to a 5-star

This made a world of difference when playing at night especially. I like to play at night after work but wife wants to sleep without light. She used to get annoyed because I needed the light for tracking so got this so she'll be quietly sleeping. And this is just perfect. Bought it, faced away from the unit and toward the wall where I face too and the illumination is just perfect with this. I don't have a way to measure it but I do have a night vision camera which showed a huge difference in the dark. The area was super well lit and the Meta Quest 3 was just flawless in tracking. Games in VR just play pitch perfect from Baseball to Cricket (IB Cricket), Golf, All in one Sports to even registering your hands and fingers. This is the best value for money at only $22. Nothing to setup even - just connect the adapters together, plug it in and place it in optimal spot and voila! Fantastic night time gaming. Heck, gaming even in day time is great as the area is well lit. However, during daytime, the camera of Meta Quest 3 picks up the bright window and gets all confused so draw the shades. What is important for perfect tracking is even lighting so it can form sharp edges during its scanning phase with fantastic contrast. And this does just that. Buy it- you won't regret VR gaming with this. Even super fast paced gaming like Cricket or Baseball or Golf where you have to swing fast

The light works fine and is very bright. Auto dusk/sunrise power on/off works fine. Power draw is 4 watts, about what an interior night light draws. Expect to see 4 red LEDs looking at you at night. The unit really needs to be available in white color. I have it mounted under the eves to illuminate my front porch and the black color sticks out like a sore thumb against a light background; the contrast makes it terribly obvious and draws attention to itself. White (like most security cameras) would blend in with far more typical exterior and interior colors.

I was having a lot of trouble with visibility on my security camera at night—it was just too dark to see anything clearly. I decided to pick up this Tendelux IR illuminator, and it has been a total game-changer. Why it’s worth it: • Total Floodlight Effect: It’s honestly impressive how much light this thing puts out. It turned a dark, grainy image into something that looks like a floodlight is hit the area, but without the visible glare of a standard light bulb. • Massive Visibility Boost: I can actually see details now that were completely lost before. If you have a "blind spot" or your camera's built-in IR just isn't reaching far enough, this fills in the gaps perfectly. • Simple Fix: It was super easy to set up and immediately solved my visibility issues.