GSCIT Club Birch Edge Banding, 3/4 inch x 50ft roll of Veneer Pre-glued Flexible, Real Wood Tape Banding for Cabinet Repair Furniture Restoration

This is a great product. We needed to recover the booth in our motorhome because the faux leather is peeling. The booth is made of plywood and has rough edges. We opted to cover the booth with heavy wallpaper, but needed something to cover the rough edges. This product is really affordable and very easy to use. It adheres pretty well. We had planned on painting the wood veneer edging, but we decided that the wood tone fit right in with the rest of the trim in the motorhome so we left it raw. While I bought 1" because that is mostly what we needed, some other areas were only 3/4" wide. It was so easy to run an Exacto knife along the extra edge and trim it smoothly.

I used this to cover the edges of some plywood shelves I built and it turned out nice. The roll comes with plenty of material and the width fit my boards perfectly. The adhesive activates easily with a regular household iron. After heating, I pressed it down and trimmed the extra with a sharp blade without any problems. The finish looks clean once applied and blends well with the rest of the wood. The veneer feels sturdy and has held up fine so far without peeling or chipping. This was my first time using edge banding and the process was pretty simple. Good option if you are doing small furniture repairs or projects.

Great product, easy application, takes wood conditioners and stains well.

Installing the edging worked best with a heat gun vs a blow dryer, Adhesive was average, some areas adhered well while some spots kept lifting. The areas where the edging is connected to create the continuous link are very visible and will not blend well when painted. I had more waste by trying to avoid these sections. The edging is easy to cut. I used 220 sand paper to blend the areas where the edging was too wide for the project edge after trimming. Be careful not to over sand the edging. I found both the 1/2 in and 3/4 in are both wider than 1/2 in and 3/4 in plywood. Expect extra time to trim the excess. The edging is flexible and easy to use when working with curved edges. Overall, the edging still gave my projects a professional look.

Exactly what I needed to carefully shim a wooden scabbard of my sword which I use in my lessons and practice performing the Japanese Martial Art of the Samurai Sword. I ordered a custom iaito (unsharpened blade sword) from the master sword smiths of NOSYUDO in Seki City, Japan. The iaito was made during winter humid months in Seki City. I had asked Nosyudo to not make the mouth/koiguchi of the iaito saya/scabbard too tight because of arthritis in my hands. When the sword reached my residence in much warmer and dryer California, the koiguchi of the saya/scabbard was too loose causing my iaito to fall out of the saya any time I bent over and could not secure it with my thumb (eg in the katas itomagoi sono ichi, itomagoi sono ni, etc.). I did research and watched videos on how to shim tighten the mouth (koiguchi) of my saya:scabbard using as close to the Japanese traditional way as possible. This thin birch tape was the perfect answer for my being able to make the perfect shimming repair. I no longer have the problem of my iaito slipping/falling out of the saya/scabbard. This roll of birch tape has a generous amount of length. Worth the price.

I have wood grain looking replacement windows. I use this tape to fix one window that is peeling. Easy to use looks great, cannot see where I fixed the window. Tape is good quality and durable. Good value. I would buy again.

Inconsistent width, and soft glue. The veneer is so thin you can see the plywood layers under it in places. The 1/2" width varies from 0.55" to 0.45" and was too narrow to cover the edge of my 0.46" plywood in spots. Even when fully cooled (left some pieces overnight before trimming) the glue is soft and tacky, and loads up on the edge banding trimmer blade. I was able to cover all my pieces, so I still gave it 3 stars. But I won't order it again. It's not worth the couple of dollars I saved. I also ordered a roll of 3/4 and threw it away. Same issues, and the color was way too light (looked more like raw maple than birch)

Used to refinish a table edge. Worked well and can be trimmed with scissors.

The adhesive is not strong enough and I have to apply contact glue to make sure it bond well.

I purchased this since it had a darker look than normal walnut in all of the pictures. This is completely false and is just standard light coloured walnut edge banding, completely misleading.

Very satisfied. Width is perfect for 3/4 plywood with just enough extra for easy trimming of each side. Good thickness, not brittle. Splices are are almost completely invisible, you really have to look hard to find them. Color is a little darker than maple plywood from my local big box store (Ontario, Canada), but close enough. Grain is very neutral. Glue is consistent for the entire length and bonds very well. Stands up well to light sanding.

I am very happy and make me a lot more faster to achieve what I need.Thanks!

Llego bien la pieza, en buen estado y de acuerdo a lo que presentaron en la imagen. Si es confiable comprar