Gira Keyless In 260528 Keypad System 55 Anthracite

Gira 2605 28Keyless In keypad Information Keypad as access control system based on a capacitively acting and therefore wear-free keypad. The keypad has the following characteristics: • Installation in the 58 mm flush-ed box. • Capacitive keypad. To enter the code, a little approach or touch the figure is sufficient. Due to the wear-free capacitive technology, no visible wear of often used number combination. • Allows a stand-alone device or in combination with the Gira door communication system, enables convenient door opening for authorised persons and a door call system for buildings with multiple dwelling units. • In stand-alone mode, the isolated relay contacts in the flush-ed insert are used for sw operations, e.g. for door openers with their own power supply (e.g. commercial bell transformer). • Special key "C": Delete a wrong entry. • Special key "key": When the correct code is filed, the door opens directly upon key operation. • Special key "bell": Selective dialling of home stations in large objects. • Special key "F": In conjunction with sw actuators 1211 00, 1289 00 of the Gira door communication system sw functions become possible. • Activation with direct configuration on the device possible - the keypad is taken in operation without a PC or programming software. • geneous blue LED illumination of the numerals and special characters at night. • Design diversity through integration into the Gira design platforms TX_44, system 55. Integration in surface switch and stainless steel series 20, series 21 possible with adapter frames. • Master PIN number on the enclosed sealed security card in case of loss of the administrator PIN number. • The keypad can manage up to 255 codes. • Up to 32 digits long codes possible. • Audible feedback when pressing a key. • Tri-colour LED status indicator for optical signalling during programming and during the operation. • Audible warning when unauthorised removal of keyboard attachment for sabotage detection. In combination with the Gira door communication system, a sabotage circuit by sw actuator can also realised. • The two built-in sw relays can be assigned to two different codes, e.g. code 1: Door opening, code 2: Turn the external light. • Using the DCS-IP-gateway, the Keyless In devices can be connected to the Gira HomeServer. Thus, intelligent short-cuts are possible. E.g., temporary or one-time access permissions can be easily granted. All data including the access permissions can then be managed centrally and flexibly via the Gira HomeServer. For this feature enhancements, Keyless In devices from an index 03 and the HomeServer Expert from version 2.6 are required. Inputs and outputs • Sw contact: 2 relays with isolated change-over contacts • Load capacity 24 volts/1,6 amps AC/DC • Power distribution system Gira door communication system • 2 ports additional supply Specifications Protection type: IP 20 (IP TX_44 = 44). Power consumption: 24 volts DC ± 10% (power supply 1296 00) or 26 volts DC ± 2 volts (door communication bus voltage). Temperature range: -20°C to +70°C. ESD strength: up to 16 kV. SpecificationsAnthracite

• Intelligent building technology from Gira.
• Switch programme.
• ›See more product details.